fujicentral_logo VICTOR_logo

FV-200-PC is a 35mm digitally-controlled projector, intending to the sync projection by SMPTE Timecode that supports the new media, being equipped with the pulse-driven electric element, the high resolution zoom lens, and the pulse lighting Xenon lamp. It has the stable screen and the high quality image that can be projected with the conventional 35mm film as well. Furthermore, it is compact and lightweight, and the noise reduction is achieved.

Fuji Central FV-200-PC

Specifications

PROJECTION MECHANISM

Model 35mm digitally-controlled projector

Aperture mask Horizontal masking,

HDTV 11.80X21.00mm

SD 15.30X21.00mm

VV 11.30X21.00mm

CS 18.16X21.00mm

Film trap Curved type, 200g or less single pressure

Shutter Conical, rotation speed 2880rpm

Lens holder 71.8mm DIA.

Focusing Micro drive type

Framing interface 1/4 frames preceding method by intermittent sprocket rotation angle

Film speed 24fps (Power supply synchronization)

Film transport motor DC servomotor, synced to intermittent sprocket motor

Start-up time Within 3 seconds

Screen unsteadiness Less than 1.5/1000

Projection angle +5°, -10°

Film safety device Film break detection (aperture side), film break and film vertical split detection (winding side)

OPTICAL SIGNAL PICKUP

Rotation stabilizing system Tight loop system

Slit lens X-11 type 1-MIL

Exciter lamp DC10V, 5A

Photoelectric conversion element Silicon blue cell, Stereo type

Wow and flutter Within 0.2% WRMS

Output level 1V p-p, 1kΩ (XLR-3-32 balanced type)

Frequency characteristics 63Hz~12.5kHz within ±1.5dB

THE LIGHT SOURCE UNIT

Lamp used 2kW Pulse lighting Xenon lamp

XP-2000 / H-OL (Toshiba)

Lighting system Horizontal

Cooling system Forced cooling by the cooling fan motor

Light collecting mirror 260mm DIA. ellipsoidal mirror

Heat wave filter 800nm heat-reflecting mirror

Total luminous flux 14,000lumens or more

PROJECTION LENS UNIT

Focal length 75- 150mm 2X zoom

Resolution Center 100 lines, left and right 80 lines

Coating Multi-coating

WINDING MECHANISM

Film capacity 2,000feet (20 minutes)

Reel shaft 12.7mm (½-inch)

Winding motor DC Servo motor

Continuous control Control system potentiometer

POWER SUPPLY

Power supply voltage AC100V, 50/60 Hz

Power consumption Main body portion 500VA, Servo control section 2,500VA

WEIGHT

Main body portion 160kg, Servo control section 110kg

For performance improvement, the standards, appearance, etc. are subject to change without notice.

Patents pending